DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
415
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an IGMP snooping multicast group profile with the name “test”:
DGS-1510-28XMP/ME:admin# create igmp_snooping multicast_vlan_group_profile test
Command: create igmp_snooping multicast_vlan_group_profile test
Success.
DGS-1510-28XMP/ME:admin#
48-4
config igmp_snooping multicast_vlan_group_profile
Description
This command is used to configure an IGMP snooping multicast group profile on the Switch and add or delete
multicast addresses for the profile.
Format
config igmp_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcast_address_list>
Parameters
<profile_name 1-32>
- Enter the multicast VLAN group name here. This name can be up to 32 characters long.
add
- Specifies to add a multicast address list to or from this multicast VLAN profile.
delete
- Specifies to delete a multicast address list to or from this multicast VLAN profile.
<mcast_address_list>
- Enter the multicast VLAN IP address here. This can be a continuous single multicast
addresses, such as 225.1.1.1, 225.1.1.3, 225.1.1.8, or a multicast address range, such as 225.1.1.1-225.2.2.2,
or both types, such as 225.1.1.1, 225.1.1.18-225.1.1.20.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add the single multicast address 225.1.1.1 to the IGMP snooping multicast VLAN profile named “test”:
DGS-1510-28XMP/ME:admin# config igmp_snooping multicast_vlan_group_profile test add 225.1.1.1
Command: config igmp_snooping multicast_vlan_group_profile test add 225.1.1.1
Success.
DGS-1510-28XMP/ME:admin#
Summary of Contents for DGS-1510/ME Series
Page 1: ......
