D-Link DGS-1510/ME Series, Reference Manual

Page: 383 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
379
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - (Optional) Specifies the ID of the VLAN for which you want to view the MLD snooping configuration.
<vlanid_list> - Enter the VLAN ID list here.
If no parameter is specified, the system will display all current MLD snooping configurations.
Restrictions
None.
Example
To show MLD snooping:
DGS-1510-28XMP/ME:admin# show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Enabled
Data Driven Learning Max Entries : 128
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Querier State : Enabled
Querier Role : Querier
Querier IP : FE80::201:2FF:FE03:400
Querier Expiry Time : 0 secs
State : Enabled
Fast Done : Disabled
Rate Limit : No Limitation
Report Suppression : Enabled
Version : 2
Data Driven Learning State : Enabled
Data Driven Learning Aged Out : Disabled
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-1510-28XMP/ME:admin#
45-8 show mld_snooping group
Description
This command is used to display the current MLD snooping group information on the Switch.
Format
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>] {<ipv6addr>}}
{data_driven}