D-Link DGS-1510/ME Series, Reference Manual

Page: 205 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
201
Chapter 21 DHCP Server Screening Command
List
config filter dhcp_server [add permit server_ip <ipaddr> ports [<portlist> | all] | delete permit server_ip <ipaddr>
ports [<portlist> | all] | ports [<portlist> | all] state [enable | disable] | illegal_server_log_suppress_duration
[1min | 5min | 30min] | trap_log [enable | disable]]
show filter dhcp_server
21-1 config filter dhcp_server
Description
This command is used to configure DHCP server screening.
With DHCP server screening function, illegal DHCP server packet will be filtered. This command is used to
configure the state of the function for filtering of DHCP server packet and to add/delete the DHCP server binding
entry.
This command is useful for projects that support per port control of the DHCP server screening function. The filter
can be based on the DHCP server IP address.
The command has two purposes: To specify to filter all DHCP server packets on the specific port and to specify to
allow some DHCP server packets with pre-defined server IP addresses. With this function, we can restrict the
DHCP server to service specific DHCP clients. This is useful when two DHCP servers are present on the network,
one of them provides the private IP address, and one of them provides the IP address.
Enabling filtering of the DHCP server port state will create one access profile and create one access rule per port
(UDP port = 67). Filter commands in this file will share the same access profile.
Addition of a permit DHCP entry will create one access profile and create one access rule. Filtering commands in
this file will share the same access profile.
Format
config filter dhcp_server [add permit server_ip <ipaddr> ports [<portlist> | all] | delete permit server_ip
<ipaddr> ports [<portlist> | all] | ports [<portlist> | all] state [enable | disable] |
illegal_server_log_suppress_duration [1min | 5min | 30min] | trap_log [enable | disable]]
Parameters
add permit server_ip - Specifies to add a DHCP permit server IP address.
<ipaddr> - Enter the DHCP server IP address here.
ports - Specifies the port number of filter DHCP server.
<portlist> - Enter the list of ports to be configured here.
all - Specifies that all the port will be used for this configuration.
delete permit server_ip - Specifies to delete a DHCP permit server IP address.
<ipaddr> - Enter the DHCP server IP address here.
ports - Specifies the port number of filter DHCP server.
<portlist> - Enter the list of ports to be configured here.
all - Specifies that all the port will be used for this configuration.
ports - Specifies the port number of filter DHCP server.
<portlist> - Enter the list of ports to be configured here.
all - Specifies that all the port will be used for this configuration.