D-Link DGS-1510/ME Series, Reference Manual

Page: 80 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
76
6-2 delete access_profile
Description
This command is used to delete access list profiles. ACL profile ID 1 and 2 cannot be deleted. When this command
is issued for profile ID 1 and 2, all the settings within these profiles will be removed. When this command is issued
for profile ID 3 and more, the complete profile will be deleted entirely.
Format
delete access_profile [profile_id <value 1-512> | profile_name <name 32> | all]
Parameters
profile_id - Specifies the index of the access list profile.
<value 1-512> - Enter the profile ID value here. This value must be between 1 and 512.
profile_name - Specifies the name of the profile.
<name 32> - Enter the profile name. The maximum length is 32 characters.
all - Specifies that the whole access list profile will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the access list rule with a profile ID of 1:
DGS-1510-28XMP/ME:admin# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DGS-1510-28XMP/ME:admin#
6-3 config access_profile
Description
This command is used to configure an access list entry. The ACL mirror function works after the mirror has been
enabled and the mirror port has been configured using the mirror command.
When applying an access rule to a target, the setting specified in the VLAN field will not take effect if the target is a
VLAN.
Format
config access_profile [profile_id <value 1-512> | profile_name <name 32>] [add access_id [auto_assign |
<value 1-128>] [ethernet {[vlan <vlan_name 32> | vlan_id <vlanid 1-4094>] {mask <hex 0x0-0x0fff>} |
source_mac <macaddr> {mask <macmask>} | destination_mac <macaddr> {mask <macmask>} | 802.1p
<value 0-7> | ethernet_type <hex 0x0-0xffff>} | ip {[vlan <vlan_name 32> | vlan_id <vlanid 1-4094>] {mask
<hex 0x0-0x0fff>} | source_ip <ipaddr> {mask <netmask>} | destination_ip <ipaddr> {mask <netmask>} |
dscp <value 0-63> | [icmp {type <value 0-255> | code <value 0-255>} | igmp {type <value 0-255>} | tcp
{src_port <value 0-65535> {mask <hex 0x0-0xffff>} | dst_port <value 0-65535> {mask <hex 0x0-0xffff>} | flag
[all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port <value 0-65535> {mask <hex 0x0-0xffff>} | dst_port