DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
91
Chapter 7
Address Resolution Protocol (ARP)
Command List
create arpentry
<ipaddr> <macaddr>
delete arpentry
[<ipaddr> | all]
config arpentry
<ipaddr> <macaddr>
config arp_aging time
<value 0-65535>
clear arptable
show arpentry
{ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address <macaddr>}
7-1
create arpentry
Description
This command is used to enter a static ARP entry into the Switch’s ARP table.
Format
create arpentry <ipaddr> <macaddr>
Parameters
<ipaddr>
- The IP address of the end node or station.
<macaddr>
- The MAC address corresponding to the IP address above.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a static ARP entry for the IP address 10.48.74.121 and MAC address 00-50-BA-00-07-36:
DGS-1510-28XMP/ME:admin# create arpentry 10.48.74.121 00-50-BA-00-07-36
Command: create arpentry 10.48.74.121 00-50-BA-00-07-36
Success.
DGS-1510-28XMP/ME:admin#
7-2
delete arpentry
Description
This command is used to delete an ARP entry, by specifying either the IP address of the entry or all. Specifies ‘all’
clears the Switch’s ARP table.
Summary of Contents for DGS-1510/ME Series
Page 1: ......
