DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
265
disable
- Specifies to disable the data driven learning option.
aged_out
- Specifies to enable or disable the aging out of the entry.
enable
- Specifies to enable the aging out of the entry.
disable
- Specifies to disable the aging out of the entry. By default, the state is disabled state.
expiry_time
- Specifies the data driven group lifetime in seconds. This parameter is valid only when aged_out is
enabled.
<sec 1-65535>
- Enter the expiry time here. This value must be between 1 and 65535 seconds.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the data driven learning of an IGMP snooping group on the default VLAN:
DGS-1510-28XMP/ME:admin# config igmp_snooping data_driven_learning vlan_name default state
enable
Command: config igmp_snooping data_driven_learning vlan_name default state enable
Success.
DGS-1510-28XMP/ME:admin#
31-14
config igmp_snooping data_driven_learning max_learned_entry
Description
This command is used to configure the maximum number of groups that can be learned by data driven.
When the table is full, the system will stop the learning of the new data-driven groups. Traffic for the new groups
will be dropped.
Format
config igmp_snooping data_driven_learning max_learned_entry <value 1-1024>
Parameters
<value 1-1024>
- Enter the maximum learning entry value here. This value must be between 1 and 1024. The
default setting is 128.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the maximum number of groups that can be learned by data driven:
Summary of Contents for DGS-1510/ME Series
Page 1: ......
