manualshive.com logo in svg

D-Link DGS-1510/ME Series, Reference Manual

The D-Link DGS-1510/ME Series Reference Manual is a comprehensive guide for users seeking detailed instructions on maximizing the potential of their DGS-1510/ME Series product. Obtain this invaluable resource for free by visiting our website and effortlessly downloading the manual, ensuring you fully optimize your device's capabilities.

Share
Download
background image

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide 

164 

 

Parameters 

<value 1-5>

 - Enter the profile ID value here. This value must be between 1 and 5. 

ethernet

 - Specifies that the profile type will be Ethernet. 

vlan

 - (Optional) Specifies a VLAN mask. 

source_mac

 - (Optional) Specifies the source MAC mask. 

<macmask>

 - Enter the source MAC mask here. 

destination_mac

 - (Optional) Specifies the destination mac mask. 

<macmask>

 - Enter the destination MAC mask here. 

802.1p 

- (Optional) Specifies 802.1p priority tag mask. 

ethernet_type

 - (Optional) Specifies the Ethernet type mask. 

ip

 - Specifies that the profile type will be IP. 

vlan

 - (Optional) Specifies a VLAN mask. 

source_ip_mask

 - (Optional) Specifies an IP source submask. 

<netmask>

 - Enter the IP source submask here. 

destination_ip_mask

 - (Optional) Specifies an IP destination submask. 

<netmask>

 - Enter the IP destination submask here. 

dscp

 - (Optional) Specifies the DSCP mask. 

icmp

 - (Optional) Specifies that the rule applies to ICMP traffic. 

type

 - (Optional) Specifies that the rule applies to ICMP type traffic. 

code

 - (Optional) Specifies that the rule applies to ICMP code traffic. 

igmp

 - (Optional) Specifies that the rule applies to IGMP traffic. 

type

 - (Optional) Specifies that the rule applies to IGMP type traffic. 

tcp

 - Specifies that the rule applies to TCP traffic. 

src_port_mask

 - (Optional) Specifies the TCP source port mask. 

<hex 0x0-0xffff>

 - Enter the source TCP port mask here. 

dst_port_mask

 - (Optional) Specifies the TCP destination port mask. 

<hex 0x0-0xffff>

 - Enter the destination TCP port mask here. 

flag_mask

 - (Optional) Specifies the TCP flag field mask. 

all

 - Specifies that the TCP flag field mask will be set to all. 

urg

 - (Optional) Specifies that the TCP flag field mask will be set to urg. 

ack

 - (Optional) Specifies that the TCP flag field mask will be set to ack. 

psh

 - (Optional) Specifies that the TCP flag field mask will be set to psh. 

rst

 - (Optional) Specifies that the TCP flag field mask will be set to rst. 

syn

 - (Optional) Specifies that the TCP flag field mask will be set to syn. 

fin

 - (Optional) Specifies that the TCP flag field mask will be set to fin. 

udp

 - (Optional) Specifies that the rule applies to UDP traffic. 

src_port_mask

 - (Optional) Specifies the UDP source port mask. 

<hex 0x0-0xffff>

 - Enter the source UDP port mask here. 

dst_port_mask

 - (Optional) Specifies the UDP destination port mask. 

<hex 0x0-0xffff>

 - Enter the destination UDP port mask here. 

protocol_id_mask

 - (Optional) Specifies that the rule applies to the IP protocol ID traffic. 

<hex 0x0-0xff>

 - Enter the IP protocol ID mask here. 

user_define_mask

 - (Optional) Specifies that the rule applies to the IP protocol ID and the mask options 

behind the first 4 bytes of the IP payload. 

<hex 0x0-0xffffffff>

 - Enter the user-defined IP protocol ID mask here. 

packet_content_mask

 - Specifies the frame content mask, there are 5 offsets in maximum could be configured. 

Each offset presents 16 bytes, the range of mask of frame is 80 bytes (5 offsets) in the first eighty bytes of 
frame. 

offset_0-15

 - (Optional) Specifies that the mask pattern offset of the frame will be between 0 and 15. 

Summary of Contents for DGS-1510/ME Series















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-1510/ME Series

Magnat Audio MC 200 Faq preview
MC 200
Brand: Magnat Audio Pages: 2
Cabletron Systems SmartSwitch Router User'S Reference Manual preview
SmartSwitch Router
Brand: Cabletron Systems Pages: 338
H3C s5800 series Quick Start Manual preview
s5800 series
Brand: H3C Pages: 33
H3C S5500-SI Series Operation Manual preview
S5500-SI Series
Brand: H3C Pages: 1217
3Com MSR 50 Series Configuration Manual preview
MSR 50 Series
Brand: 3Com Pages: 2443
H3C SR6600 Series Installation Manual preview
SR6600 Series
Brand: H3C Pages: 3
H3C SR6616 Installation, Quick Start preview
SR6616
Brand: H3C Pages: 4
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
8level IPG-200 User Manual preview
IPG-200
Brand: 8level Pages: 52
Moxa Technologies PT-7710 Series Hardware Installation Manual preview
PT-7710 Series
Brand: Moxa Technologies Pages: 2
Ace ADSL2+ Wireless MIMO Router User Manual preview
ADSL2+ Wireless MIMO Router
Brand: Ace Pages: 64
Olicom Ethernet MCA 10/100 Adapter Manual To Operations preview
Ethernet MCA 10/100 Adapter
Brand: Olicom Pages: 88
FiberHome AN5506-04-F User Manual preview
AN5506-04-F
Brand: FiberHome Pages: 2
Wave Wireless Networking SPEEDLAN 4100 Installation And Operation User Manual preview
SPEEDLAN 4100
Brand: Wave Wireless Networking Pages: 167
Alfa Network AC1200R Setup Manual preview
AC1200R
Brand: Alfa Network Pages: 11
NetCommWireless NTC-220 Series Quick Start Manual preview
NTC-220 Series
Brand: NetCommWireless Pages: 28
Transition Networks N-FXE-xxx-01 User Manual preview
N-FXE-xxx-01
Brand: Transition Networks Pages: 5
ADC 150-204-100-03 User Manual preview
150-204-100-03
Brand: ADC Pages: 29

Brands by name

Popular brands

Load more brands