DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
44
DGS-1510-28XMP/ME:admin# config 802.1x capability ports 1-10 authenticator
Command: config 802.1x capability ports 1-10 authenticator
Success.
DGS-1510-28XMP/ME:admin#
4-12
config 802.1x max_users
Description
This command is used to limit the maximum number of users that can be learned via 802.1X authentication. In
addition to the global limitation, maximum user for per port is also limited. It is specified by the
config 802.1x
auth_parameter
command.
Format
config 802.1x max_users [<value 1–448> | no_limit]
Parameters
<value 1-448>
- Enter the maximum number of users. This value must be between 1 and 448.
no_limit
– Specifies that the maximum user limit will be set to 448.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure 802.1X number of users to be limited to 200:
DGS-1510-28XMP/ME:admin# config 802.1x max_users 200
Command: config 802.1x max_users 200
Success.
DGS-1510-28XMP/ME:admin#
4-13
config 802.1x auth_parameter ports
Description
This command is used to configure the parameters that control the operation of the authenticator associated with a
port.
Format
config 802.1x auth_parameter ports [<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535> | supp_timeout
<sec 1-65535> | server_timeout <sec 1-65535> | max_req <value 1-10> | reauth_period <sec 1-65535> |
max_users [<value 1-448> | no_limit] | enable_reauth [enable | disable]}(1)]
Summary of Contents for DGS-1510/ME Series
Page 1: ......
