DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
168
the first 4 bytes of the IP payload.
<hex 0x0-0xffffffff>
- Enter the user-defined IP protocol ID mask here.
packet_content
- Specifies the frame content pattern, there are 5 offsets in maximum could be configure. Each
offset presents 16 bytes, the range of content of frame is 80 bytes(5 offsets) in the first eighty bytes of frame.
offset_0-15
- (Optional) Specifies that the mask pattern offset of the frame will be between 0 and 15.
<hex 0x0-0xffffffff>
- Enter the mask pattern offset of the frame between 0 and 15 here.
offset_16-31
- (Optional) Specifies that the mask pattern offset of the frame will be between 16 and 31.
<hex 0x0-0xffffffff>
- Enter the mask pattern offset of the frame between 16 and 31 here.
offset_32-47
- (Optional) Specifies that the mask pattern offset of the frame will be between 32 and 47.
<hex 0x0-0xffffffff>
- Enter the mask pattern offset of the frame between 32 and 47 here.
offset_48-63
- (Optional) Specifies that the mask pattern offset of the frame will be between 48 and 63.
<hex 0x0-0xffffffff>
- Enter the mask pattern offset of the frame between 48 and 63 here.
offset_64-79
- (Optional) Specifies that the mask pattern offset of the frame will be between 64 and 79.
<hex 0x0-0xffffffff>
- Enter the mask pattern offset of the frame between 64 and 79 here.
ipv6
- Specifies the rule applies to IPv6 fields.
class
- (Optional) Specifies the value of IPv6 class.
<value 0-255>
- Enter the IPv6 class value here. This value must be between 0 and 255.
flowlabel
- (Optional) Specifies the value of IPv6 flow label.
<hex 0x0-0xffff>
- Enter the IPv6 flow label here.
source_ipv6
- (Optional) Specifies the value of IPv6 source address.
<ipv6addr>
- Enter the IPv6 source address used for this configuration here.
destination_ipv6
- (Optional) Specifies the value of IPv6 destination address.
<ipv6addr>
- Enter the IPv6 destination address used for this configuration here.
port
- Specifies the list of ports to be included in this configuration.
<portlist>
- Enter a list of ports used for the configuration here.
all
- Specifies that all the ports will be used for this configuration.
permit
- Specifies the packets that match the access profile are permit by the Switch.
deny
- Specifies the packets that match the access profile are filtered by the Switch.
time_range
- (Optional) Specifies name of this time range entry.
<range_name 32>
- Enter the time range here.
delete
- Specifies to delete a rule from the profile ID entered.
access_id
- Specifies the index of access list entry. The range of this value is 1-100.
<value 1-100>
- Enter the access ID here. This value must be between 1 and 100.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure CPU access list entry:
Summary of Contents for DGS-1510/ME Series
Page 1: ......
