DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
230
Chapter 28
Filter Database (FDB) Command
List
create fdb
<vlan_name 32> <macaddr> [port <port> | drop]
create fdb vlanid
<vidlist> <macaddr> [port <port> | drop]
create multicast_fdb
<vlan_name 32> <macaddr>
config multicast_fdb
<vlan_name 32> <macaddr> [add | delete] <portlist>
config fdb aging_time
<sec 10-1000000>
config multicast vlan_filtering_mode
[vlanid <vidlist> | vlan <vlan_name 32> | all] [forward_all_groups |
forward_unregistered_groups | filter_unregistered_groups]
delete fdb
<vlan_name 32> <macaddr>
clear fdb
[vlan <vlan_name 32> | port <port> | all]
show multicast_fdb
{[vlan <vlan_name 32> | vlanid <vidlist>] | mac_address <macaddr>}
show fdb
{port <port> | [vlan <vlan_name 32> | vlanid <vidlist>] | mac_address <macaddr> | static | aging_time |
security}
show multicast vlan_filtering_mode
{[vlanid < vidlist> | vlan <vlan_name 32>]}
28-1
create fdb
Description
This command is used to create a static entry in the unicast MAC address forwarding table (database).
Format
create fdb <vlan_name 32> <macaddr> [port <port> | drop]
Parameters
<vlan_name 32>
- Specifies a VLAN name associated with a MAC address. The maximum length of the VLAN
name is 32 bytes.
<macaddr>
- Specifies the MAC address to be added to the static forwarding table.
port
- Specifies the port number corresponding to the MAC destination address. The Switch will always forward
traffic to the specified device through this port.
<port>
- Enter the port number corresponding to the MAC destination address here.
drop
- Specifies the action drop to be taken.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a unicast MAC forwarding entry:
Summary of Contents for DGS-1510/ME Series
Page 1: ......
