manualshive.com logo in svg

D-Link DGS-1510/ME Series, Reference Manual

The D-Link DGS-1510/ME Series Reference Manual is a comprehensive guide for users seeking detailed instructions on maximizing the potential of their DGS-1510/ME Series product. Obtain this invaluable resource for free by visiting our website and effortlessly downloading the manual, ensuring you fully optimize your device's capabilities.

Share
Download
background image

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide 

319 

 

default state is disable. 

system_capabilities

 - (Optional) Specifies that the LLDP agent should transmit 'System Capabilities TLV'. 

The system capability will indicate whether the device provides repeater, bridge, or router function, and 
whether the provided functions are currently enabled. The default state is disable. 

enable

 - Specifies that the basic TLV data types used from outbound LLDP advertisements will be enabled. 

disable

 - Specifies that the basic TLV data types used from outbound LLDP advertisements will be disabled. 

dot1_tlv_pvid

 - Specifies that whether the IEEE 802.1 organizationally defined port VLAN ID TLV transmission is 

allowed on a given LLDP transmission capable port. The default state is disable. 

enable

 - Specifies that the Dot1 TLV PVID option will be enabled. 

disable

 - Specifies that the Dot1 TLV PVID option will be disabled. 

dot1_tlv_protocol_vid

 - Specifies that whether the IEEE 802.1 organizationally defined port and protocol VLAN 

ID TLV transmission is allowed on a given LLDP transmission capable port. The default state is disable. 

vlan

 - Specifies the VLAN used for this configuration. 

all

 - Specifies that all the configured VLANs will be used for this configuration. 

<vlan_name 32>

 - Enter the name of the VLAN here. This name can be up to 32 characters long. 

vlanid

 - Specifies the VLAN ID used for this configuration. 

<vlanid_list>

 - Enter the ID of the VLAN here. 

enable

 - Specifies that the Dot1 TLV protocol VID will be enabled. 

disable

 - Specifies that the Dot1 TLV protocol VID will be disabled. 

dot1_tlv_vlan_name

 - Specifies that whether the corresponding Local System’s VLAN name instance will be 

transmitted on the port. If a port is associated with multiple VLANs. those enabled VLAN ID will be advertised. 
The default state is disable. 

vlan

 - Specifies the VLAN used for this configuration. 

all

 - Specifies that all the configured VLANs will be used for this configuration. 

<vlan_name 32>

 - Enter the name of the VLAN here. This name can be up to 32 characters long. 

vlanid

 - Specifies the VLAN ID used for this configuration. 

<vlanid_list>

 - Enter the ID of the VLAN here. 

enable

 - Specifies that the Dot1 TLV VLAN name will be enabled. 

disable

 - Specifies that the Dot1 TLV VLAN name will be disabled. 

dot1_tlv_protocol_identity

 - Specifies that whether the corresponding Local System's Protocol Identity instance 

will be transmitted on the port. The Protocol Identity TLV provides a way for stations to advertise protocols that 
are important to the operation of the network. Such as Spanning Tree Protocol, the Link Aggregation Control 
Protocol, and numerous vendor proprietary variations are responsible for maintaining the topology and 
connectivity of the network. If EAPOL, GVRP, STP (including MSTP), and LACP protocol identity is enabled on 
this port and it is enabled to be advertised, then this protocol identity will be advertised. The default state is 
disable. 

all

 - Specifies that all the vendor proprietary protocols will be advertised. 

eapol

 - (Optional) Specifies that the EAPOL protocol will be advertised. 

lacp

 - (Optional) Specifies that the LACP protocol will be advertised. 

gvrp

 - (Optional) Specifies that the GVRP protocol will be advertised. 

stp

 - (Optional) Specifies that the STP protocol will be advertised. 

enable

 - Specifies that the protocol identity TLV according to the protocol specified will be advertised. 

disable

 - Specifies that the protocol identity TLV according to the protocol specified will not be advertised. 

dot3_tlvs

 - Specifies that the IEEE 802.3 specific TLV data type will be configured. 

all

 - (Optional) Specifies that all the IEEE 802.3 specific TLV data type will be used. 

mac_phy_configuration_status

 - (Optional) Specifies that the LLDP agent should transmit 'MAC/PHY 

configuration/status TLV'. This type indicates it is possible for two ends of an IEEE 802.3 link to be 
configured with different duplex and/or speed settings and still establish some limited network connectivity. 
More precisely, the information includes whether the port supported the auto-negotiation function, whether 
the function is enabled, the auto-negotiated advertised capability, and the operational MAU type. The 
default state is disabled. 

link_aggregation

 - (Optional) Specifies that the LLDP agent should transmit 'Link Aggregation TLV'. This type 

indicates the current link aggregation status of IEEE 802.3 MACs. More precisely, the information should 

Summary of Contents for DGS-1510/ME Series















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-1510/ME Series

ZyXEL Communications P-336M Quick Start Manual preview
P-336M
Brand: ZyXEL Communications Pages: 125
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Brand: Global411 Pages: 15
NETGEAR RP614 - Web Safe Router Installation Manual preview
RP614 - Web Safe Router
Brand: NETGEAR Pages: 16
H3C SecPath F50X0 Series Manual preview
SecPath F50X0 Series
Brand: H3C Pages: 41
QNAP TS 73A Series User Manual preview
TS 73A Series
Brand: QNAP Pages: 68
IBM 4003-R04 User Manual preview
4003-R04
Brand: IBM Pages: 24
IBM TS4300 Manual preview
TS4300
Brand: IBM Pages: 288
Juniper EX8200 Series Brochure preview
EX8200 Series
Brand: Juniper Pages: 12
D-Link DSL-3785 User Manual preview
DSL-3785
Brand: D-Link Pages: 127
Tripp Lite N302-006 Specification Sheet preview
N302-006
Brand: Tripp Lite Pages: 2
Bosch GKF 10.8V-8 Professional Manual preview
GKF 10.8V-8 Professional
Brand: Bosch Pages: 20
Bosch RA1141 Operating/Safety Instructions Manual preview
RA1141
Brand: Bosch Pages: 103
Siemens SIMATIC S7-CPs Manual preview
SIMATIC S7-CPs
Brand: Siemens Pages: 60
3Com EtherLink 3C985B-SX User Manual preview
EtherLink 3C985B-SX
Brand: 3Com Pages: 113
iBall Baton iB-WRA300N User Manual preview
iB-WRA300N
Brand: iBall Baton Pages: 75
INSYS WLAN bridge Operating Manual preview
WLAN bridge
Brand: INSYS Pages: 50

Brands by name

Popular brands

Load more brands