DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
429
<value 1-200000000>
- Enter the internal cost value here. This value must be between 1 and 200000000.
priority
- (Optional) Specifies the port priority value.
<value 0-240>
- Enter the port priority value here. This value must be between 0 and 240.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure STP MST ports:
DGS-1510-28XMP/ME:admin# config stp mst_ports 1 instance_id 0 internalCost auto
Command: config stp mst_ports 1 instance_id 0 internalCost auto
Success.
DGS-1510-28XMP/ME:admin#
49-11
config stp ports
Description
This command is used to configure all the parameters of ports, except for Internal Path Cost and Port Priority.
Format
config stp ports <portlist> {externalCost [auto | <value 1-200000000>] | hellotime <value 1-2> | migrate [yes
| no] | edge [true | false | auto] | p2p [true | false | auto] | state [enable | disable]| restricted_role [true | false]
| restricted_tcn [true | false] | fbpdu [enable | disable]}
Parameters
<portlist>
- Enter a list of ports used for the configuration here.
external_cost
- (Optional) Specifies the path cost between MST regions from the transmitting Bridge to the CIST
Root Bridge. It is only used at CIST level.
auto
- Specifies that the external cost value will be set to automatic.
<value 1-200000000>
- Enter the external cost value here. This value must be between 1 and 200000000.
hellotime
- (Optional) Specifies the hello time. The default value is 2. This parameter is for MSTP version. For
STP and RSTP version, uses the per system hellotime parameter.
<value 1-2>
- Enter the hello time value here. This value must be between 1 and 2.
migrate
- (Optional) Specifies whether the port will send MSTP BPDU for a delay time.
yes
- Specifies that the MSTP BPDU for a delay time will be sent.
no
- Specifies that the MSTP BPDU for a delay time will not be sent.
edge
- (Optional) Specifies whether this port is connected to a LAN or a Bridged LAN.
true
- Specifies that the specified port(s) is edge.
false
- Specifies that the specified port(s) is not edge.
auto
- Specifies that the bridge will delay for a period to become edge port if no bridge BPUD is received. The
default is auto mode.
p2p
- (Optional) Specifies whether this port is in Full-Duplex or Half-Duplex mode.
true
- Specifies that the port(s) is in Full-Duplex mode.
Summary of Contents for DGS-1510/ME Series
Page 1: ......
