DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
500
Example
If a product supports per-port 802.1p mapping configuration, configure the mapping of 802.1p priority 1 to red on
ports 1-8.
DGS-1510-28XMP/ME:admin# config 802.1p map 1-8 1p_color 1 to red
Command: config 802.1p map 1-8 1p_color 1 to red
Success.
DGS-1510-28XMP/ME:admin#
60-17
show 802.1p map 1p_color
Description
This command is used to display the 802.1p to color mapping.
Format
show 802.1p map 1p_color {<portlist>}
Parameters
<portlist>
- (Optional) Specifies a list of ports.
Restrictions
None.
Example
To show the 802.1p color mapping on port 1:
DGS-1510-28XMP/ME:admin# show 802.1p map 1p_color 1
Command: show 802.1p map 1p_color 1
802.1p to Color Mapping:
----------------------------------------------------------------
Port 0 1 2 3 4 5 6 7
---- ------ ------ ------ ------ ------ ------ ------ ------
1 Green Green Green Green Green Green Green Green
DGS-1510-28XMP/ME:admin#
60-18
config dscp trust
Description
This command is used to configure the state of DSCP trust per port. When DSCP is not trusted, 802.1p is trusted.
Format
config dscp trust [<portlist> | all] state [enable | disable]
Summary of Contents for DGS-1510/ME Series
Page 1: ......
