DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
81
6-4
show access_profile
Description
This command is used to display the current access list table.
Format
show access_profile {[profile_id <value 1-512> | profile_name <name 32>]}
Parameters
profile_id
- (Optional) Specifies the index of the access list profile.
<value 1-512>
- Enter the profile ID used here. This value must be between 1 and 512.
profile_name
- (Optional) Specifies the name of the profile.
<name 32>
- Enter the profile name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To display the current access list table:
DGS-1510-28XMP/ME:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 1
Total Used HW Entries : 125
Total Available HW Entries : 899
================================================================================
Profile ID: 1 Profile name: t1 Type: Ethernet
MASK on
VLAN : 0xFFF
Source MAC : 00-00-00-00-00-01
Destination MAC : 00-00-00-00-00-02
802.1p
Ethernet Type
Available HW Entries : 66
================================================================================
================================================================================
Profile ID: 2 Profile name: 2 Type: IPv4
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
ENTER
Next Entry
a
All
The following example displays an access profile that supports an entry mask for each rule:
Summary of Contents for DGS-1510/ME Series
Page 1: ......
