DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
216
Chapter 25
Energy Efficient Ethernet (EEE)
Command List
config eee ports
[<portlist> | all] state [enable | disable]
show eee ports
{<portlist>}
25-1
config eee ports
Description
This command is used to enable or disable the EEE function on the specified port(s) on the Switch.
NOTE:
EEE and ERPS are mutually exclusive functions.
Format
config eee ports [<portlist> | all] state [enable | disable]
Parameters
<portlist>
- Enter a range of ports to be configured.
all
- Specifies to configure all ports.
state
- Specifies the EEE state. The default is disabled.
enable
- Specifies to enable the EEE function for the specified port(s).
disable
- Specifies to disable the EEE function for the specified port(s).
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the EEE state on ports 2-5:
DGS-1510-28XMP/ME:admin#config eee ports 2-5 state enable
Command: config eee ports 2-5 state enable
Success.
DGS-1510-28XMP/ME:admin#
25-2
show eee ports
Description
This command is used to display the EEE function state on the specified port(s).
Summary of Contents for DGS-1510/ME Series
Page 1: ......
