DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
564
Chapter 68
Single IP Management Command
List
enable sim
disable sim
show sim
{[candidates {<candidate_id 1-100>} | members {<member_id 1-32>} | group {commander_mac
<macaddr>} | neighbor]}
reconfig
{member_id <value 1-32> | exit}
config sim_group
[add <candidate_id 1-100> {<password>} | delete <member_id 1-32>]
config sim
[{[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-90> | hold_time
<sec 100-255>}]
download sim_ms
[firmware_from_tftp | configuration_from_tftp] {<ipaddr> <path_filename> {[members <mslist
1-32> | all]}}
upload sim_ms
[configuration_to_tftp | log_to_tftp] {<ipaddr> <path_filename> {[members <mslist> | all]}}
config sim trap
[enable | disable]
68-1
enable sim
Description
This command is used to configure the single IP management on the Switch as enabled.
Format
enable sim
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SIM:
DGS-1510-28XMP/ME:admin# enable sim
Command: enable sim
Success.
DGS-1510-28XMP/ME:admin#
Summary of Contents for DGS-1510/ME Series
Page 1: ......
