DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
503
red
- Specifies the result color of mapping to be red.
yellow
- Specifies the result color of mapping to be yellow.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the mapping of the DSCP priority to priority 1:
DGS-1510-28XMP/ME:admin# config dscp map 1-8 dscp_priority 1 to 1
Command: config dscp map 1-8 dscp_priority 1 to 1
Success.
DGS-1510-28XMP/ME:admin#
To configure the global mapping of the DSCP priority to priority 1:
DGS-1510-28XMP/ME:admin# config dscp map dscp_priority 1 to 1
Command: config dscp map dscp_priority 1 to 1
Success.
DGS-1510-28XMP/ME:admin#
60-21
show dscp map
Description
This command is used to show DSCP trusted port list and mapped color, priority and DSCP.
Format
show dscp map {<portlist>} [dscp_priority | dscp_dscp | dscp_color] {dscp <dscp_list>}
Parameters
<portlist>
- (Optional) Enter a range of ports to show. If no parameter is specified, all ports’ DSCP mapping will
be displayed.
dscp_priority
- Specifies a list of DSCP value to be mapped to a specific priority.
dscp_dscp
- Specifies a list of DSCP value to be mapped to a specific DSCP.
dscp_color
- Specifies a list of DSCP value to be mapped to a specific color.
dscp
- (Optional) Specifies the DSCP value that will be mapped.
<dscp_list>
- Enter the DSCP list here.
Restrictions
None.
Summary of Contents for DGS-1510/ME Series
Page 1: ......
