Costar Video Systems CRINEXSN04-2TB, User Manual

Page: 51 / 171

Network Video Recorder
43
Log List
 Number of results displayed on the list
: Set
up the number of log entries to be displayed at
once (in the case of
Device Log , maximum
100 logs at once regardless of the setting).
 Update Interval : Set up the status update
interval in the Device Check panel.
Instant Event
 Time Range : Set up the length of time for an
event notification to be displayed in the Instant
Event List after notification of the event detection
(If the event list has 100 or fewer items, the event
list will remain on the Instant Event List even if
the length of time has expired).
 Column : Select the information to be displayed
in Instant Event List.
 Callback Port : Set up the port number to receive
a callback message from the device. This setting
will be used only when the monitoring service
does not run. The NVR system uses the callback
port of the monitoring service, which is set in the
Service Manager program when the monitoring
service runs. The port number you enter should
match the port number set on the device for
remote callback.
 Live Text-In Time Range : Set up the length
of time for a text-in data to be displayed when a
text-in event occurs. You can check the text-in
data in the text-in viewer window within the
time range since the text-in event occurred.
Refer to
5.3 Controlling Cameras
,
Text-In
Viewer (p. 59) for details about the text-in
viewer window.
 Event Sound : Set up to sound by playing back an audio file when an event is detected. Select a desired
event and set up an audio file (.wav) by clicking the button. Clicking the button allows you to
test the sound by playing back the selected audio file.
 Event Spot : Video from the event-detected camera is displayed on the event spot screen when an event
is detected.
− Event monitoring dwell
: Set up the duration for video to be displayed on the event spot screen.
− Minimum monitoring dwell
: Set up the event monitoring dwell time for the current event when other
events are detected while event-detected video is displayed. Video from other events is displayed after
the preset time expires.