Costar Video Systems CRINEXSN04-2TB, User Manual

Page: 123 / 171

Network Video Recorder
115
− Encoding Interval : Select an encoding interval. The higher the value, the higher the bit rate and the
worse the video quality.
− Bit Rate Limit
: Enter the maximum bit rate. You can control the network bandwidth by limiting the
bit rate depending on the network traffic.
Audio
 Source Configuration : Displays the source
configuration information (Configuration: audio
source, Name: source name, Use Count: the
number of profiles that use the source, Source
Token: the number of tokens).

Encoder Configuration
: Set up an encoder.
− Audio Encoder Configuration
: Select an
audio encoder from the list of the audio encoders
supported in the device.
− Name : Assign a name to the selected audio
encoder.
− Use Count
: Displays the number of profiles
that use the selected audio encoder.
− Encoding : Select an audio compression codec.
− Bit Rate : Select a bit rate.
− Sample Rate : Select the sampling rate. The
higher the value is, the better the sound quality
and the larger the data size.
I/O
 Mode : Set the relay mode for the input and output
devices.
− Monostable : After setting the idle state, the
relay returns to its idle state once the delay time
expires.
− Bistable : After setting the idle state, the relay
remains in this state.
 Delay Time : Set the delay time until the relay returns to its idle state in the Monostable mode.
 Idle State : Set the physical idle state of a relay output.
− Open : Indicates that the relay is open when the relay state is set to Inactive and closed when the state
is set to Active.
− Closed : Indicates that the relay is closed when the relay state is set to Inactive and is open when the state
is set to Active.
 Action : Controls the relay state.
− Active : Clicking the button sets the relay state to Active.
− InActive : Clicking the button sets the relay state to InActive.