Architecture of the Compaq ProLiant Clusters HA/F100 and HA/F200
1-15
Compaq Confidential – Need to Know Required
Writer:
Bryan Hicks
Project:
Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Comments:
Part Number:
380362-003
File Name:
b-ch1 Architecture of the Compaq ProLiant Clusters HAF100 and HAF200.doc
Last Saved On:
8/24/00 11:58
AM
Compaq Software
Compaq offers an extensive set of features and optional tools to support the
configuration and management of your Compaq ProLiant Cluster:
■
Compaq SmartStart and Support Software CD
■
Compaq Redundancy Manager (Fibre Channel)
■
Compaq SANworks Secure Path for Windows 2000 on RAID Array
4000/4100
■
Compaq Insight Manager
■
Compaq Insight Manager XE
■
Compaq Intelligent Cluster Administrator
■
Compaq Cluster Verification Utility (CCVU)
Compaq SmartStart and Support Software CD
Compaq SmartStart is located on the SmartStart and Support Software CD
included in the Compaq Server Setup and Management Pack shipped with
ProLiant servers. SmartStart is the recommended way to configure the
Compaq ProLiant Cluster HA/F100 or HA/F200. SmartStart uses a step-by-
step process to configure the cluster and load the system software. For
information concerning SmartStart, refer to the Compaq Server Setup and
Management pack.
For information about using SmartStart to install the Compaq ProLiant
Cluster HA/F100 and HA/F200, see chapters 3 and 4 of this guide.
Compaq Array Configuration Utility
The Compaq Array Configuration Utility, found on the Compaq SmartStart
and Support Software CD, is used to configure the array controller, add disk
drives to an existing configuration, and expand capacity.
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......
