6-16
Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments:
Part Number: 380362-003 File Name: g-ch6 Troubleshooting the Compaq ProLiant Clusters HAF100 and HAF200.doc Last Saved On: 8/24/00 12:04
PM
Troubleshooting Compaq
Redundancy Manager
The following section addresses events, warning messages, and error messages
generated by Redundancy Manager.
Event Logging
Redundancy Manager displays messages warning of possible changes and
events. When a message is displayed, click on help to receive more details
about that particular message.
The Event Viewer for Microsoft Windows NTS/E displays additional
information. For more information on using the Event Viewer, refer to your
Microsoft operating system documentation.
Informational Messages
Table 6-6 provides a list of informational messages and actions to take using
Redundancy Manager.
Table 6-6
Compaq Redundancy Manager Informational Messages
Message
Description
Action
Another instance has locked the
loop. This instance is running in
Read Only mode.
Another application has issued a
lock management command to
an array controller. The lock
management command only
allows viewing of the data.
No action is needed to view the
data.
The lock could not be set.
The array controller board is in
an unknown state that has
caused a failed connection to
the array controller.
No action is needed to view the
data.
Continued
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......
