Using Compaq Redundancy Manager in a Single-Server Environment
B-7
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments: First Draft
Part Number: 380362-003 File Name: i-appb Using Compaq Redundancy Manager in a Single-Server Environment.doc.doc Last Saved On: 8/24/00
12:05 PM
Changing Paths
The following information describes how to change paths using Redundancy
Manager.
NOTE:
Redundancy Manager will not change the configuration until you close the
Redundancy Manager program or select Apply Changes. The Main Screen may not show
the current system configuration. Use Refresh (
F5
) to see the current configuration.
Changing from Standby to Active Paths
To change a path from Standby to Active mode:
1.
Highlight the Standby path you want to change.
2.
Select Path from the main screen menu bar.
3.
Select Set As Active from the Path menu.
The selected Standby path will change to Active when you select Apply
Changes or close Redundancy Manager.
Changing from Active to Standby Paths
To change a path from Active to Standby mode:
1.
Highlight the Active path you want to change.
2.
Select Path from the main screen menu bar.
3.
Select Set As Standby from the Path menu.
The selected Active path will change to Standby when you select Apply
Changes or close Redundancy Manager.
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......
