Managing the Compaq ProLiant Clusters HA/F100 and HA/F200
5-13
Compaq Confidential – Need to Know Required
Writer:
Bryan Hicks
Project:
Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Comments:
Part Number:
380362-003
File Name:
f-ch5 Managing the Compaq ProLiant Clusters HAF100 and HAF200.doc
Last Saved On:
8/24/00 12:03 PM
Compaq Redundancy Manager
Compaq Redundancy Manager (Fibre Channel) increases the availability of
single-server or clustered systems using Compaq StorageWorks RA4000/4100
on Windows NTS/E. Redundancy Manager can detect failures of the Compaq
StorageWorks Fibre Channel Host Adapter (host bus adapter), Compaq
StorageWorks RA4000 Controller (array controller), and Fibre Channel data
paths. It then reroutes the I/O processing.
This section provides information on how to use and configure Redundancy
Manager by providing the means to change and set active and standby paths.
See Appendix B for information about using Redundancy Manager in a
single-server environment.
Figure 5-1 is an example of the Compaq Redundancy Manager
(Fibre Channel) main screen.
Figure 5-1. Example of the main screen
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......
