3-14
Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments:
Part Number: 380362-003 File Name: d-ch3 Setting Up the Compaq ProLiant Clusters HA-F100 and HA-F200.doc Last Saved On: 8/24/00 12:02 PM
■
One of the following operating systems:
Microsoft Windows NTS/E software and documentation
Microsoft Windows 2000 Advanced Server software and
documentation
■
Microsoft Service Packs
■
Compaq redundancy management software (HA/F200 only)
Compaq Redundancy Manager (Fibre Channel) (for Windows
NTS/E)
Compaq SANworks Secure Path for Windows 2000 on RAID Array
4000/4100 for HA/F200
■
Monitoring and Management Software
Compaq Insight Manager software and documentation
Compaq Insight Manager XE software and documentation
Compaq Intelligent Cluster Administrator software and
documentation
■
Compaq Cluster Verification Utility
■
At least 10 high-density diskettes
Assisted Integration Using SmartStart
(Recommended)
IMPORTANT:
Prior to the installation of Microsoft Windows 2000 Advanced Server,
upgrade the system ROM on each node with the latest systems ROMPaq from the
Compaq website at http://www.compaq.com/support.
Use the SmartStart Assisted Integration procedure to configure the servers
(nodes) in the HA/F100 and HA/F200 configuration. You will set up two
nodes during this process. Proceed through all of the steps on each of the
nodes, with noted exceptions.
CAUTION:
Installation using SmartStart assumes that SmartStart is being
installed on new servers. Any existing data on the servers’ boot drive will be
erased.
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......