5-14
Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Compaq Confidential – Need to Know Required
Writer:
Bryan Hicks
Project:
Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Comments:
Part Number:
380362-003
File Name:
f-ch5 Managing the Compaq ProLiant Clusters HAF100 and HAF200.doc
Last Saved On:
8/24/00 12:03 PM
Changing Paths
Redundancy Manager allows you to change the active and standby paths for
your cluster. The following provides instructions for changing paths.
NOTE:
Redundancy Manager will not change the configuration until you close the
Redundancy Manager program or select Apply Changes. The main screen may not show
the current system configuration. Use Refresh (
F5
) to update the main screen to see the
current configuration.
Changing from Standby to Active Paths
To change a path from Standby to Active mode:
1.
Highlight the Standby path you want to change.
2.
Select Path from the main screen menu bar.
3.
Select Set As Active from the Path menu.
The selected Standby path will change to Active when you select Apply
Changes or close Redundancy Manager.
Changing from Active to Standby Paths
To change a path from Active to Standby mode:
1.
Highlight the Active path you want to change.
2.
Select Path from the main screen menu bar.
3.
Select Set As Standby from the Path menu.
The selected Active path will change to Standby when you select Apply
Changes or close Redundancy Manager.
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......
