Setting Up the Compaq ProLiant Clusters HA/F100 and HA/F200
3-23
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments:
Part Number: 380362-003 File Name: d-ch3 Setting Up the Compaq ProLiant Clusters HA-F100 and HA-F200.doc Last Saved On: 8/24/00 12:02 PM
If the cluster has been created correctly, the computer names of both
cluster nodes appear on the left side of the Cluster Administrator
window (see Figure 3-2).
Figure 3-2. Microsoft Cluster Administrator
If the cluster is not working correctly, see the installation
troubleshooting tips in Chapter 6.
Verifying Node Failover
NOTE:
Do not run any client activity while testing failover events.
Follow these steps to verify failover of a cluster node:
1.
Select Start, Programs, Administrative Tools (Common), Cluster
Administrator from the Windows desktop on both servers.
2.
Enter the name or IP address of one of the cluster nodes when you are
prompted for Cluster or Server Name.
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......
