Compaq ProLiant Clusters HA/F100, Administrator'S Manual, Page: 173 / 207

Troubleshooting the Compaq ProLiant Clusters HA/F100 and HA/F200 6-19
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments:
Part Number: 380362-003 File Name: g-ch6 Troubleshooting the Compaq ProLiant Clusters HAF100 and HAF200.doc Last Saved On: 8/24/00 12:04
PM
Warning Message
Table 6-7 provides a warning message and actions to take using
Redundancy Manager.
Table 6-7
Warning Message
Message Description Action
The previous lock by another
application has expired. Do you
want to override the lock and
take control of the loop? The previous lock on an array
controller has expired. No action is needed to view the
data;
Or, you can override and take
control of the array controller.
Error Messages
Table 6-8 provides a list of error messages and actions to take using
Redundancy Manager.
Table 6-8
Error Messages
Message Description Action
Another instance has locked the
loop. This instance is running in
Read Only mode. Another application has issued a
lock management command to
an array controller. The lock
management command only
allows viewing of the data. No action needed to view the
data.
To configure the data, close the
other application to unlock the
array controller. If the lock has
expired, Redundancy Manager
allows overriding the lock and
taking control of the array
controller.
Could not load resource DLL. The file containing the
configuration utility resources
could not be loaded. Reload Redundancy Manager
from the CD.
continued