Troubleshooting the Compaq ProLiant Clusters HA/F100 and HA/F200
6-15
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments:
Part Number: 380362-003 File Name: g-ch6 Troubleshooting the Compaq ProLiant Clusters HAF100 and HAF200.doc Last Saved On: 8/24/00 12:04
PM
Cluster Groups and Cluster Resource
Microsoft Cluster Administrator solves many group and cluster resource
problems. For troubleshooting tips on this topic, refer to the Microsoft
clustering documentation that came with your operating system and Cluster
Administrator’s Online Help.
Table 6-5
Solving Other Problems
Problem
Possible Cause
Action
An application starts but cannot
be closed.
Cluster Administrator must be
used to take applications offline.
Use Cluster Administrator to take
the application offline. Do not
close or exit an application from
the application interface.
A resource hangs when taken
offline.
Some resources take time to go
offline.
Wait several minutes, then check
any dependencies that the
resource may have. Verify that
each can be taken offline.
An IP address added to a cluster
group fails.
IP address configuration may be
incorrect.
1.
IP addresses must be
different from every other IP
address resource and from
every other IP address on
the network.
2.
The IP address must either
by reserved by the network
administrator or statically
assigned outside of a DHCP
scope.
A resource fails over but does not
fail back.
Groups may be configured to fail
back manually or the automatic
failback may be scheduled to
occur during a specific time
frame.
1.
If expecting an automatic
failback, verify that the
group is not set for a manual
failback.
2.
If expecting an immediate
automatic failback, verify the
group is not configured to
fail back only during a
user-defined timeframe.
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......