Using Compaq Redundancy Manager in a Single-Server Environment
B-3
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments: First Draft
Part Number: 380362-003 File Name: i-appb Using Compaq Redundancy Manager in a Single-Server Environment.doc.doc Last Saved On: 8/24/00
12:05 PM
Figure B-2 shows a single-server setup with dual RA4000/4100s. This setup
provides redundant paths and static load balancing capability.
RA4000/4100
RA4000/4100
Server
S
A
A
S
A
A
storage hub
or switch
storage hub
or switch
storage hub
or switch
storage hub
or switch
Figure B-2. Single-server setup with dual RA4000/4100s
Redundancy Manager can be configured with multiple paths to a particular
storage device. Each path can be defined as an active path, enabling static I/O
load balancing, or with one active and one or more standby paths for failover.
The Compaq Redundancy Manager graphical user interface (GUI) enables
sophisticated system configuration and control of each defined path.
Redundancy Manager is supported on all Compaq ProLiant servers in
single-server configurations.
The following sections provide information about:
■
Installing Redundancy Manager
■
Managing Redundancy Manager
■
Troubleshooting Redundancy Manager
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......