B-6
Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments: First Draft
Part Number: 380362-003 File Name: i-appb Using Compaq Redundancy Manager in a Single-Server Environment.doc.doc Last Saved On: 8/24/00
12:05 PM
11.
Close the Control Panel.
12.
Remove the Redundancy Manager CD from the CD-ROM drive.
13.
Reboot the server.
Redundancy Manager is now installed on your computer. To use Redundancy
Manager, double-click the icon.
Managing Redundancy Manager
Redundancy Manager increases the availability of single-server or clustered
systems using the RA4000/4100 storage system. Redundancy Manager can
detect failures of the host bus adapters, array controllers, and Fibre Channel
data paths. It then reroutes the I/O processing.
This section explains how to use Redundancy Manager to change and set
active and standby paths.
Figure B-3 shows the Main Screen for Redundancy Manager.
Figure B-3. Example of the main screen
Summary of Contents for ProLiant Clusters HA/F100
Page 8: ......
