Club Car DS Villager 4, Maintenance And Service Manual

Page: 65 / 510

BODY AND TRIM Two-Passenger - Rear Body
4
STRUCTURAL ACCESSORY MODULE (SAM)
Figure 4-25 SAM
SAM Removal
1. If the vehicle has a canopy, remove the rear canopy supports from the SAM (2) (Figure 4-25) .
2. Remove the four bolts (1).
SAM Installation
1. Position the SAM (2) over its mounting holes (Figure 4-25) .
2. Install the four screws (1). Tighten the screws to 71 lb·in (8 N·m).
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual Page 4-29