Club Car DS Villager 4, Maintenance And Service Manual, Page: 105 / 510

WHEEL BRAKE ASSEMBLIES Brake Shoe Removal
6
NOTE: When servicing vehicles with severely worn brake shoes and when the drums cannot be removed by normal
methods, use the following steps to minimize damage to the brake cluster and brake components.
12.1. Insert a 1/2 inch x 5/8 inch cold chisel (8) under the head (9) of each pin and shear them off as illustrated
(Figure 6-3) .
NOTE: This will release the shoes from the backing plate, allowing them to pivot away from the inside of the brake
drum (10), which should then allow the brake drum to be pulled free.
NOTE: It may be necessary to remove the sealant material around the head of each pin.
1400-18100-10220C
Figure 6-3 Shoe Retainer Pins
13. Grasp both brake shoes and pull them, together with the springs, out of the brake assembly (Figure 6-4) .
1400-17700-10225
Figure 6-4 Remove Brake Shoes
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual Page 6-3