Club Car DS Villager 4, Maintenance And Service Manual

Page: 71 / 510

BODY AND TRIM Two-Passenger - Rear Body
4
REAR UNDERBODY
Two-passenger rear underbody procedures.
Figure 4-31 Rear Underbody
Rear Underbody Removal
1. Remove the structural accessory module (SAM).
2. Remove the rear beauty panel.
3. Remove remove the four screws (1) (Figure 4-31) .
4. Lift the rear edge of the rear underbody (2) until the front portion slides out from beneath the front underbody.
Remove the rear underbody from the vehicle.
Rear Underbody Installation
1. Install the rear underbody (2) onto the vehicle (Figure 4-31) .
2. Install the four screws (1). Tighten the screws to 71 lb·in (8 N·m).
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual Page 4-35