Club Car DS Villager 4, Maintenance And Service Manual

Page: 126 / 510

7
Steering Wheel STEERING AND FRONT SUSPENSION
B
1
3
2
5
4
7
6
2519B
Figure 7-1 Steering Wheel Removal
5. Remove the cover (2).
6. Remove the steering wheel retaining bolt (3).
7. Put the puller anvil (4) through the top opening of the steering wheel (5).
8. Insert the anvil feet through the two slots in the base plate (marked “B”) (6).
9. Turn the anvil screw (7) clockwise until the base plate contacts the bottom of the steering wheel at the steering
column (8)
(Figure 7-2) .
8
7
2520B
Figure 7-2 Steering Wheel Puller
10. Use a 1/2-inch drive air impact wrench to tighten the anvil screw until the steering wheel releases from the
steering shaft.
11. Remove the steering wheel from the steering column.
STEERING WHEEL INSTALLATION
1. Apply a small amount of oil or anti-seize compound to steering shaft (2) (Figure 7-3) .
2. Install the steering wheel (1) on the steering shaft.
Page 7-2 2020 Precedent,Villager 2 and 4 Maintenance and Service Manual