21
Engine Control Linkages
GASOLINE VEHICLE - FUEL SYSTEM
ENGINE CONTROL LINKAGES
DANGER
• To ensure the vehicle does not run over you while you disconnect or adjust the accelerator push
cable, do the following:
– Turn key switch OFF and remove key, place Forward/Neutral/Reverse handle in the NEUTRAL
position, and chock the wheels prior to servicing the vehicle.
– Disconnect battery cables, negative (–) cable first.
– Disconnect the spark plug wire from the spark plug.
– See Disconnect the Battery - Gasoline Vehicles on page 1-3.
GENERAL INFORMATION
For proper vehicle operation, it is important the accelerator pedal, governor linkage, and throttle adjustments are done
correctly and in the proper sequence.
See following CAUTION.
CAUTION
• Improper adjustment can result in poor vehicle performance and/or damage to the engine components.
GROUND SPEED
NOTE:
If possible, the manufacturer recommends measuring ground speed when setting engine RPM.
This vehicle should reach the forward ground speed specified in the Vehicle Specifications Section.
GOVERNOR CABLE
Governor Cable Removal
1.
Turn the key switch to the OFF position and remove the key, place the Forward/Neutral/Reverse control (FNR) in
the NEUTRAL position, and chock the wheels.
2.
Disconnect battery and spark plug wire.
3.
At engine:
3.1.
If equipped, remove air deflector from top of engine.
Page 21-2
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Summary of Contents for DS Villager 4
