3
Electric Vehicle Extended Storage
EXTENDED STORAGE
2.
Set the Forward/Neutral/Reverse control (FNR) to N.
3.
Turn the key to OFF.
4.
Remove the key. Keep the key in a safe area.
5.
Put chocks against the wheels.
NOTE:
Do not engage the park brake.
6.
Remove all cargo and personal items.
7.
Run/Tow switch position:
NOTE:
The charge indicator light is disabled when the Run/Tow switch is set to TOW.
7.1.
On vehicles equipped with Visage that will have remote monitoring,
set the Run/Tow switch to RUN.
7.2.
On vehicles equipped with Visage that will not have remote monitoring,
set the Run/Tow switch TOW.
7.3.
On all other vehicles,
set the Run/Tow switch to TOW.
8.
Clean the batteries.
9.
Tighten all battery cable connections to 110 lb·in (12.4 N·m).
10.
Keep the vehicle in a cool and dry area to keep battery self-discharge to a minimum.
11.
Adjust pressure in each tire to recommended tire pressure.
12.
Clean the vehicle.
13.
If one or more conditions cannot be done while in storage,
disconnect the negative (-) battery cable. Make
sure that the negative (-) battery cable does not touch the battery terminal.
– The battery charger must stay connected to an electric outlet
– AC electrical power will be available during storage
– Battery acid levels will be kept at a sufficient level while in storage
14.
If all conditions can be done while in storage,
do as follows:
– The battery charger must stay connected to an electric outlet
– AC electrical power will be available during storage
– Battery battery acid levels will be kept at a sufficient level while in storage
14.1.
Connect the battery charger to the vehicle. Keep battery chargers connected during
storage. The charger will automatically connect when necessary.
14.2.
Examine the battery acid level and charger function monthly.
NOTE:
The charger is operating correctly when the blue light is ON and the triangular
light is OFF.
RETURN TO SERVICE FROM EXTENDED STORAGE - ELECTRIC
1.
Clean the batteries.
2.
If the batteries were disconnected, connect the batteries.
3.
Fully charge the batteries.
4.
Set the Run/Tow switch to RUN.
5.
Set the Forward/Neutral/Reverse control (FNR) to N.
6.
Adjust the pressure in each tire to the recommended tire pressure.
Page 3-2
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Summary of Contents for DS Villager 4
