SPXRGBUBKIT
WHAT’S INCLUDED
4 x CREE LED Pods With 3mtr Lead
4 x Flat Rubber Mounting Pads
4 x Curved Rubber Mounting Pads
1
-
x Bluetooth RGB Control Module
Mounting Accessories
TPRGBW4
OPTIONAL
EXTENSION CABLE
(TPRGBEXT4)
KIT INCLUDES
Please read instruction manual before commencing.
ADDITIONAL PARTS REQUIRED
BEFORE YOU START
3 Amp Fuse & Fuse holder
Wire
Zip-Ties
OPTIONAL
Switch
Relay
RGBW LED ROCKLIGHT KIT
INSTALLATION
Find a location for the RGBW module
(avoid mounting the module in a location
that get’s extremely hot or wet).
Make sure all
4 cables from the light pods will reach the module
(each light pod has a 3 meter lead).
If more length is required use
optional extension lead
(Part# TPRGBEXT4 -
Sold Separately
).
Find an appropriate location for the light
pods using either the supplied FLAT or
CURVED rubber mounting pads (IMAGE 1).
The lights should be mounted where they
will not
come into contact with tyres, suspension or where
they will rub/drag along the ground.
Run and connect the light cables to the RGBW module.
Be mindful to keep the cable away from any moving parts
or where the cable can be pinched or snagged (zip ties are
your friends).
1
2
3
THIS PRODUCT IS FOR OFF-ROAD USE ONLY
!
(E1) DO NOT
connect the extension leads (TPRGBEXT4) together.
(E2) ONLY ONE
Extention lead (TPRGBEXT4) can be used per
output from the module.
!
EXT.
TPRGBEXT4
EXT.
TPRGBEXT4
E1
E2
ONE
EXTENSION
LEAD (TPRGBEXT4) PER
CONNECTOR OUTPUT
