Chrysler 300 SRT8 2010 User Manual Download Page 238

Page: 238 / 449

•

If the iPod

威

battery is completely discharged, it may

not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod

威

connected

to the UCI system may charge it to the required level.

Using This Feature

By using the provided connection cable to connect an
iPod

威

to the vehicle’s UCI 16–pin connector port:

•

The iPod

威

audio can be played on the vehicle’s sound

system, providing metadata (artist, track title, album,
etc.) information on the radio display.

•

The iPod

威

can be controlled using the radio buttons to

Play, Browse, and List the iPod

威

contents.

•

The iPod

威

battery charges when plugged into the UCI

connector (if supported by the specific iPod

威

device)

Controlling The iPod

姞

Using Radio Buttons

To get into the UCI (iPod

威

) mode and access a connected

iPod

威

, press the “AUX” button on the radio faceplate.

Once in the UCI (iPod

威

) mode, iPod

威

audio tracks (if

available from iPod

威

) start playing over the vehicle’s

audio system.

Play Mode

When switched to UCI mode, the iPod

威

automatically

starts Play mode. In Play mode, you may use the
following buttons on the radio faceplate to control the
iPod

威

and display data:

•

Use the TUNE control knob to select the next or
previous track.

•

Turning it clockwise (forward) by one click, while
playing a track, skips to the next track.

•

Turning it counterclockwise (backward) by one
click, during the first two seconds of the track, will
jump to the previous track in the list. Turning this
button at any other time in the track, will jump to
the beginning of the current track.

238

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 300 SRT8 2010


































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT8 2010

Reviews:

Related manuals for 300 SRT8 2010

Brands by name

Popular brands

Chrysler 300 SRT8 2010, User Manual

Search results

Summary of Contents for 300 SRT8 2010

Reviews:

Related manuals for 300 SRT8 2010

Brands by name

Popular brands