Chopin Mixolab 2, Maintenance Manual

Page: 82 / 134

82
Maintenance manual
09/2016
Mixolab 2
Chapter 3 Repairs
■
Adjusting the mixing blades
12. Fit the mixing bowl with the mixing blades.
13. Loosen the couplings at the bowl end ( F ).
Note: To adjust this, it is imperative that the mixing bowl is locked in
place. Equally, the junctions must be properly positioned on
the mixing blade's shafts
(G) (3 mm between the junctions
and the bowl's plastic plate).
14. To adjust the mixing blades, rotate them so that their profiles
cross at roughly 10 mm from the rear edge of the bowl ( H ).
15. Tighten the couplings at the bowl end (weak Loctite thread-
lock).
16. Using the motor's thumb wheel, rotate the mixing blades to
check that everything is working properly.
17. Replace the Mixolab's left and right-hand covers (see op. 1-1)
and central cover (see op. 1-2) .
6: Motor and transmission
Operation 6-9 Removing/replacing the mixing blade coupling
Page: 2 / 2
Consumables:
Tools:
Weak threadlock (Loctite)
-
G
F
H