Chopin Mixolab 2, Maintenance Manual

Page: 104 / 134

104
Maintenance manual
09/2016
Mixolab 2
Chapter 3 Repairs
c. Sensor gain
The sensor's gain is indicated on a yellow label (see photo oppo-
site). Note it carefully.
d. Resetting the sensor to 2.5V
1. Reset the sensor to 2.5V, see 2.5V setting.
2. Remember to put the screw back in the sensor.
e. Final torque setting
1. Click the brown tab ( G ).
2. Enter the following password: 1576 .
3. Fill in the torque settings table ( H ) with the values previously
recorded ( I ). Confirm by clicking OK.
4. Click YES to modify the sensor setting.
Note : The no-load torque should be very close to 0.
12: Adjusting and control operations for the Mixolab
Operation 12-9 Adjusting the torque meter
Page: 2 / 2
Consumables:
Tools:
-
Multimeter
G
H
I
Sensor gain
Number of turns (2.5 V)
Number of turns (1.8 V)
Voltage measured for the "1.8 V" setting