Chopin Mixolab 2, Maintenance Manual

Page: 44 / 134

44
Maintenance manual
09/2016
Mixolab 2
Chapter 3 Repairs
a. Removing/replacing the filter switch
1. Remove the right-hand cover of the Mixolab (see op. 1-1) .
Locate each electrical wire on the switch on the grey ter-
minal block (A).
2. Remove the switch's electrical connections on this terminal
block; insert a small screwdriver in the slot next to each wire
then pull the wire (
B ).
3. Unscrew the retaining screws on the switch. Extract the switch
from its base
(C) .
4. Change the filter switch.
To replace the filter switch, do the above in reverse order.
To replace the filter switch fuse, use a type of fuse speci-
fied by the manufacturer. See chapter 4 “Spare parts”.
1: Basic operations
Operation 1-4 Filter switch
Page: 1 / 1
Consumables:
Tools:
-
-
C
B
A