Chopin Mixolab 2, Maintenance Manual

Page: 101 / 134

101
Maintenance manual
09/2016
Mixolab 2
Chapter 3 Repairs
■
Calibration
1. On the "Configuration" tab then "Maintenance", on the drawing
of the pump, click the brown corner (
A ).
2. In the "check/adjust pump" window type the following pass-
word:
1576 , then confirm by clicking "OK".
3. Click Reset.
4. Type the following password: 2508 , then confirm by clicking
"OK".
5. Place the container on the scales and set the tare.
6. Place the nozzle on the container and hold it while filling the
container.
7. Enter 10.00 ml in the inject volume field, hold the nozzle on the
container and press ON.
The proportioning pump fills up.
8. When the pump empties, remove the nozzle and weigh the
quantity of water. Record the measurement. Example:
Remember to wipe the container carefully between each weighing.
12: Adjusting and control operations for the Mixolab
Operation 12-8 Calibrating the Mixolab's pump
Page: 1 / 4
Consumables:
Tools:
Distilled water
Container, scales accurate to within 1/100 g
Adjustment Check at 25 ml
10 ml
4 decimal places
30 ml
4 decimal places
l between 24.875
and 25.125
no. 1 9.9681
no. 2 9.9265
no. 3 9.9207
Aver-
age 9.9384