INSTALLER level
1
Press the Menu,
-
, and
+
buttons
simultaneously for 3 seconds.
2
“InSt” and parameter number “0000” and
parameter value “- - - -” will be displayed in the
display.
Among 4 digits of parameter numbers, 2
digits of them which indicates group or code
numbers will be flashed.
Press “
-
or
+
button” to switch the flashing 2
digits from left 2 showing group numbers to
right 2 showing code numbers.
3
In INSTALLER level, more parameters than
USER level can be accessed.
The procedures of setting parameters are
same as USER level.
4
To return to normal operation, press and hold
the Menu,
-
and
+
button for 3 seconds,
or simply do nothing for approximately 10
minutes.
2
2
If invalid parameters (the value which is not on the
parameter list or not accessible level) are entered and Set
button is pressed, the indication “- - - - ” is displayed.
Press the Return button to return to the previous item.
Note1: The Parameter setting menu can be set using the Master Remote controller. The Slave Remote controller
cannot be used for this.
3 seconds
3 seconds
1
･
4
1
･
4
Select parameter group numbers
Select parameter code numbers
48
5. Operation and functions of the Remote controller
Summary of Contents for AEYC-0639U-CH
Page 156: ...20810030 M ...