11
3. Installation
SELECTION ON THE PLACE
• Consider a place where the noise and the air discharged to not affect neighbours.
• Consider a position protected from the wind.
• Consider an area that respects the minimum spaces recommended.
• Consider a place that does not obstruct the access to doors or corridors.
• The surfaces of the floor must be solid enough to support the weight of the unit and minimise the transmission of
vibrations.
DANGER
• Do not install where there is the danger of combustible gas leakage.
• If children may approach the unit, take preventive measures so that they cannot reach the unit.
• Install the unit in a place where it will not be inclined more than 5 °.
When installing the unit where it may exposed to strong wind, brace it securely.
Decide the mounting position with the customer as follows:
(1) Install the unit in a location which can withstand the weight of the unit and vibration. Please make sure it is
installed level.
(2) Provide the indicated space to ensure good airflow.
(3) Do not install the unit near a source of heat, steam, or flammable gas.
(4) During heating operation, condensate water flows from the unit. Therefore, install the unit in a place where the
condensate water flow will not be obstructed.
(5) Do not install the unit where strong wind blows or where it is very dusty.
(6) Do not install the unit where people pass.
(7) Install the unit in a place where it will be free from being dirty or getting wet by rain as much as possible.
CAUTION
• When the outdoor temperature is 0°C or less, remove the drain pipe and use without it. If the drain pipe is used,
the drain water in the pipe may freeze in extremely cold weather.
• In the area with heavy snowfall, if the intake and outlet of unit is blocked with snow, it might become difficult to get
warm and it is likely to cause of the breakdown. Please construct a canopy and a pedestal or place the unit on a
high stand.
Summary of Contents for AEYC-0639U-CH
Page 156: ...20810030 M ...