manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 97 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 97

1-85

Securing a Child Restraint Designed for the 
LATCH System

1. Find the anchors for the seating position you want to

use, where the bottom of the seatback meets the back
of the seat cushion.

2. Put the child restraint on the seat.

3. If the child restraint is forward

-

facing, attach the

anchor points on the child restraint to the anchors in
the vehicle. The child restraint instructions will show
you how.

4. Attach the top strap to the top strap anchor. See “Top

Strap” in the Index. Tighten the top strap according
to the child restraint instructions.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect 
the anchor points.

Securing a Child Restraint in a Rear
Outside Seat Position

You’ll be using the lap

-

shoulder belt. See the earlier 

part about the top strap if the child restraint has one. 
Be sure to follow the instructions that came with the
child restraint. Secure the child in the child restraint
when and as the instructions say.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments