manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 344 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 344

5-27

3. Near each wheel,

there is a notch in
the vehicle’s body.
Position the jack
and raise the jack
head until it fits
firmly into the
notch in the
vehicle’s frame
nearest the flat tire.

NOTICE:

Do not place the jack under the rear axle control
arms. Only use the areas shown for proper 
jack location.

Do not raise the vehicle yet. Put the compact spare
tire near you.

CAUTION:

Getting under a vehicle when it is jacked up is
dangerous. If the vehicle slips off the jack, you
could be badly injured or killed. Never get under
a vehicle when it is supported only by a jack.

CAUTION:

Raising your vehicle with the jack improperly
positioned can damage the vehicle and even make
the vehicle fall. To help avoid personal injury 
and vehicle damage, be sure to fit the jack lift
head into the proper location before raising 
the vehicle.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments