manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 36 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 36

1-24

Stowable Seat

The optional stowable seat is a full bench seat and
comes with the convenience center. See “Convenience
Center” in the Index for more information. The stowable
seat can be removed and replaced, or with the seatback
folded, it can lie flush with the convenience center.

Folding the Seatback

To fold down the seatback,
pull up on the lever on the
back of the seat and push
the seatback down until 
it is locked into place.

Push and pull on the seatback to make sure that it is
locked into place.

To raise the seatback, do one of the following:
D From the rear of the vehicle, pull up on the lever to

release the seatback, then pull the strap, located on
the right side of the seat, to pull the seatback up. 
The seatback has a velcro patch to stow the strap 
on the rear of the seat when not in use, or

D from the passenger’s side sliding door, pull up on 

the lever to release the seatback, then push up on the
seatback to raise the seat.

Push and pull on the seatback to make sure that it is
locked into the upright position.

CAUTION:

If the seatback isn’t locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it 
is locked.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments