Home
/
Chevrolet
/
VENTURE 2001
/
Manual

Chevrolet VENTURE 2001, Manual, Page: 172 / 460

Share

Page: 172 / 460

Chevrolet VENTURE 2001 Manual Download Page 172

2-59

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
D Turn Signal and Lane

-

Change Indicator

D Headlamp High/Low

-

Beam Changer

D Flash

-

to

-

Pass

D Windshield Wiper and Washer Control
D Cruise Control (Option)

Turn Signal and Lane-Change Indicator

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.

To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.

An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

As you signal a turn or a lane change, if the arrow
flashes faster than normal, a signal bulb may be burned
out and other drivers won’t see your turn signal.

«
...
170
171
172
173
174
...
»

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments