manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 336 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 336

5-19

6. Start the engine and let it run until you can feel the

upper radiator hose getting hot. Watch out for the
engine cooling fans.

7. By this time, the coolant level inside the radiator

filler neck may be lower. If the level is lower, add
more of the proper DEX

-

COOL

R

 coolant mixture

through the filler neck until the level reaches the
base of the filler neck.

8. Then replace the pressure cap. At any time during

this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrows on the pressure cap line up like this.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments