manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 270 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 270

3-37

CD

: This button will eject a disc or discs, if you

have multiple discs loaded. To eject a disc or discs from
the disc player perform one of the following steps:
D Press and release the eject button to eject the disc

that is currently playing, or

D to eject all of the discs, press this button for two

seconds, you will hear a beep, and the light will flash
to let you know when a disc is being ejected.

When the eject button is pressed, the receiver will eject
the disc and REMOVE CD will be displayed. You can
now remove the disc. If the disc is not removed, after 
25 seconds, the disc will be automatically pulled back
into the receiver. If you try to push the disc back into the
receiver, before the 25 second time period is complete,
the receiver will sense an error and will try to eject 
the disc several times before stopping. You cannot
repeatedly press the eject button to eject the disc 
after you have tried to push the CD in manually. 
The receivers 25

-

second eject timer will reset at each

press of eject, which will cause the receiver to not eject
the disc until the 25

-

second time period has elapsed.

Once the player stops and the disc is ejected, remove the
disc. After removing the disc, press the VOLUME PWR
knob off and then on again. This will clear the disc

-

sensing

feature and enable discs to be loaded into the player again.

REV: Press and hold this button to reverse quickly
within a track. Release it to play the passage. You will
hear sound at a reduced volume. The display will show
elapsed time.

FWD: Press and hold this button to advance quickly
within a track. Release it to play the passage. You will
hear sound at a reduced volume. The display will show
elapsed time.

RPT: With repeat, you can repeat one track or an entire
disc. To use repeat, do the following:
D To repeat the track you are listening to, press and

release the RPT button. RPT will appear on the
display. Press RPT again to turn it off.

D To repeat the disc you are listening to, press and hold

the RPT button for two seconds. Press RPT again to
turn if off.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments